Products

Fits 1/2" Rebar

PERMAMARK plastic caps are easy to tap on rebar or pipe and are available with your name and number.

No charge for stamping your markers 

• (minimum order: 200; same imprint, same size).
• Two parallel lines of information are available. All  is recessed lettering on the surface.
• Available in yellow, orange, red and now pink!
• (pink is only available in PERM4000 & PERM5000).

Permamark plastic survey monument markers

• Permanent Identification
• Cost Effective
• Installs fast and easy
• Stamping Included
• Eliminates Electrolysis
• Non-Corrosive

Fits 5/8" Rebar

More Info

PERMAMARK plastic caps are easy to tap on rebar or pipe and are available with your name and number. There is no charge for stamping your markers (minimum order: 200; same imprint, same size). Two parallel lines of information are available. All lettering isrecessed into the surface. Available in yellow, orange, red and now pink (pink is only available in PERM4000 & PERM5000). Four sizes fit inside water pipe or over rebar: 3/8" (10 mm) rebar or 1/2" (13 mm) pipe, 1/2" (13 mm) rebar or 3/4" (19 mm) pipe, 5/8" (16 mm) rebar or 1" (25 mm) pipe, and 3/4" (19 mm) rebar.

Permamark plastic survey monument markers

• Permanent Identification
• Cost Effective
• Installs fast and easy
• Stamping Included
• Eliminates Electrolysis
• Non-Corrosive

Fits 3/4" Rebar

More Info

PERMAMARK plastic caps are easy to tap on rebar or pipe and are available with your name and number. There is no charge for stamping your markers (minimum order: 200; same imprint, same size). Two parallel lines of information are available. All lettering isrecessed into the surface. Available in yellow, orange, red and now pink (pink is only available in PERM4000 & PERM5000). Four sizes fit inside water pipe or over rebar: 3/8" (10 mm) rebar or 1/2" (13 mm) pipe, 1/2" (13 mm) rebar or 3/4" (19 mm) pipe, 5/8" (16 mm) rebar or 1" (25 mm) pipe, and 3/4" (19 mm) rebar.

Permamark plastic survey monument markers

• Permanent Identification
• Cost Effective
• Installs fast and easy
• Stamping Included
• Eliminates Electrolysis
• Non-Corrosive

• Embossed with "Bigeye" brand logo
• 18/8 Stainless Steel Vaccum Mug
• 10oz size with lid

• Embossed with "Bigeye" brand logo
• Laser engraved with "eGPS Solutions"
• 18/8 Stainless Steel Vaccum Mug
• 10oz size with lid

• Embossed with "Bigeye" brand logo
• 18/8 Stainless Steel Vaccum Mug
• 20oz size with lid

24" Ground Control Disc (50/Box)

• Ground control disc
• Biodegradable
• 24" diameter
• 50 discs per box

28" Reflective Traffic Cone with 6" and 4" Collars Features

• Injection molded PVC, MUTCD Compliant
• Rubber base for excellent stability and anti-skid performance
• Fluorescent orange color throughout for superior fade resistance
• Reflective collar for MUTCD compliant nighttime performance
• Ridges on the inner cone allow for easy stacking and deployment
• Reflective collars are recessed, providing abrasion resistance and easy stacking
• PVC and rubber formulation provides excellent all-weather performance

• 2 Meter
• Carbon Fiber
• Fixed Height Pole

2M Telescopic Rover Pole - High Level Bubble

• 2 meters
• Telescopic rover pole
• Level bubble is at 4.9 ft.-recommended for tall surveyors
• Comes with carrying bag

2-Piece Carbon Fiber GPS Pole GLS22 (No Graduations)

• Carbon fiber GPS pole
• 2 sections connected by 5/8" screw
• Features 5/8" adapter to accept GPS antenna
• Includes carrying bag

• Embossed with "Bigeye" brand logo
• 18/8 Stainless Steel Vaccum Mug
• 30oz size with lid

Online orders for this product are eligible for store pickup only.
Please call 770-695-3361 for a shipping quote.

36" LiDAR/Photogrammetry Ground Target

• 36" x 36" target
• Inner circle has a 24" diameter
• Perfect for LiDAR and photogrammetry projects
• Biodegradable

YR-20AM 360 degree Leica Style Prism Set

Specification:

Prism System: 360°

Prism Offset: -10mm

Mount Adapter: Leica type or 5/8"

3A Safety Groups Rainwear Safety Jacket - Lime

• 100% ANSI ultra lightweight 100% water-resistant 21OD taffeta shell
• Flannel-lined body and sleeves
• Snap front closure
• 2" ANSI certified silver reflective stripes
• Drawstring waistline
• Two large weatherproof slash pockets
• 360° reflectivity provides full body outline

ANSI Classes

ANSI Class 1

• For jobs where traffic is traveling at or below 25 mph
• Must be either safety yellow or safety orange
• Minimum of 155 square inches of reflective tape
• Examples: Sidewalk repair in a small residential neighborhood

ANSI Class 2

• For jobs where traffic is moving under 50 mph
• Minimum of 775 inches of safety yellow or safety orange background material and 201 square inches of reflective striping
• Examples: Survey crews, airport baggage handlers, school crossing guards

ANSI Class 3

• For jobs where traffic is traveling over 50 mph or in conditions where visibility is at a minimum
• Minimum of 1,240 inches of safety yellow or safety orange background and 310 square inches of reflective striping
• Examples: Nighttime, high speed roadways, hurricanes

3A Safety Groups Surveyor Safety Vest - Orange

• Heavy duty surveyor's vest
• 100% ANSI certified fluorescent ice cool polyester mesh
• Reflective edging enhances low light visibility
• Zipper front closure with durable webbing reinforcement
• 2" ANSI certified silver reflective stripes
• Contrasting stripes provide extra day & night visibility
• One 4-division pen pocket and one radio pocket with secure strap
• Two lower cargo pockets with grommets and two inside pouch pockets
• Left chest badge holder/mic tab

ANSI Classes

ANSI Class 1

• For jobs where traffic is traveling at or below 25 mph
• Must be either safety yellow or safety orange
• Minimum of 155 square inches of reflective tape
• Examples: Sidewalk repair in a small residential neighborhood

ANSI Class 2

• For jobs where traffic is moving under 50 mph
• Minimum of 775 inches of safety yellow or safety orange background material and 201 square inches of reflective striping
• Examples: Survey crews, airport baggage handlers, school crossing guards

ANSI Class 3

• For jobs where traffic is traveling over 50 mph or in conditions where visibility is at a minimum
• Minimum of 1,240 inches of safety yellow or safety orange background and 310 square inches of reflective striping
• Examples: Nighttime, high speed roadways, hurricanes

6" Marking Whiskers Features

These 6" Marking Whiskers (also known as stake whiskers, stake trackers, stake chasers, etc) are great for immediate identification at survey and construction sites, reference points, underground utilities, etc. 

• Highly visible
• Impervious to dirt and dust
• Installed quickly and easily
• Resistant to heavy equipment damage
• Will not wash away
• 25 per bunch

8 ft Aluminum and Carbon Fiber Prism Pole w/ Dual Graduations and Adapter

• 8 ft aluminum and carbon fiber prism pole
• Dual graduations
• 5/8" adjustable copper adapter

ABS Case for XFG2, XFG1P, GA-AK18L Features

• For XFG2, XFG1P, GA-AK18L
• Orange hard case

AccuSharp Knife and Tool Sharpener (001) Features

• A knife sharpener anyone can use!
• In about 10 seconds, sharpen knives (even serrated knives), cleavers, axes, machetes and many other cutting tools
• Large ergonomic handle fits either hand safely and securely
• Full length finger guard protects your fingers
• Sharpening blades are diamond-honed tungsten carbide and provide years of reliable use
• Will not rust and can be cleaned with soap and water, or in the dishwasher

Agatec Agatape7 Laser Distance Meter Features

The Agatec Agatape7 Laser Distance Meter makes measuring easier than ever with its accurate readings within ±1/16-inch and a wide working range of up to 230 feet. This digital measuring tool utilizes real laser technology to measure distances, areas and volumes. It can also determine indirect measurements using the Pythagorean method, truly a great tool for both indoor and outdoor use. 

• Area and Volume: Calculations completed in seconds
• Pythagoras: Ideal for measuring indirect height and width to inaccessible positions
• Tracking Mode: Helpful when searching for the diagonal or the perpendicular from surface to surface
• Stake Out: To stake out continuous equal distances, such as layout of metal studs
• Flip-Out Endpiece: For accurate measurement from a surface edge or corner

Agatec DM100 Laser Distance Meter

The Agatec DM100 Laser Distance Meter provides professionals and non-professionals with the basic applications necessary to measure and calculate linear distances with ease and accuracy. This lightweight and ergonomic handheld distance meter can be used in both indoor and outdoor, with a working range of up to 98 feet. In addition to its convenient design and portability, the Agatec DM100 laser measurer is also very precise, measuring within ±3/32-inch accuracy when the target surface and room temperature are optimal.

• Measures up to 30 m (100 ft) with 2 mm (0.08 in) accuracy
• Ergonomic
• Designed for professionals

Allied Tools Mill Bastard File Features

The aggressive teeth of Allied files allow you to rough shape wood and polymers. They are constructed from high quality alloy steel that are built to last. A large contoured two material handle provides a comfortable, non-slip grip. This item is a must for any tool box.

• High quality alloy steel
• Comfortable rubber handles

Aluminum Snap-Lock GPS Pole - Yellow GLS26A

• One-piece design, two locking system for stability
• Snap-lock locks at 1.6m and 2.0m
• Features 5/8" adapter to accept GPS antenna
• Lightweight with vial and easy to carry
• Includes carrying bag

Alvin 12" High Impact Plastic Architect Triangular Scale Features

• 12" triangular scale
• Ideal for scholastic and vocational use
• Satin finish, high-impact plastic with tapered edges
• Sharp, easy-to-read graduations resist wear
• English and metric
• Blister-carded
• Graduations: 3/32, 3/16, 1/8, 1/4, 1/2, 1, 3/8, 3/4, 1-1/2, 3" to the foot; one edge to 16ths

Alvin 12" High Impact Plastic Engineer Triangular Scale Features

• 12" triangular scale
• Ideal for scholastic and vocational use
• Satin finish, high-impact plastic with tapered edges
• Sharp, easy-to-read graduations resist wear
• English and metric
• Blister-carded
• Graduations: 10, 20, 30, 40, 50, 60 parts to the inch

Alvin 4" Mini Aluminum Engineer Triangular Scale Features

• Professional pocket scale constructed of solid aluminum
• Lightweight and durable
• Features tapered edges and color-coded furrows
• Graduations: 10, 20, 30, 40, 50, 60 parts to the inch

Alvin Circle Radius Master Template Features

• Contains 54 circles and radii cutouts to draw circles from 3/64" to 7-1/2"
• Features centering lines around each precision-milled cutout with screenprinted markings and graduations
• Pencil allowance on openings for 0.5 mm pencil lead
• Non-glare, odor-free, flexible and durable translucent green plastic
• Scale: 3/64" to 7-1/2"
• Size: 7-1/2" x 10" x 0.03"

Alvin Fluorescent Triangle 30°/60° Features

• Made of molded polystyrene 0.10" thick with double-beveled inking edges and double beveled center cutout fingerlifts
• Fluorescent orange color reflects light along the drawing edge
• Available sizes: 4", 6", 8", 10", 12", 14"

Alvin Fluorescent Triangle 45°/90° Features

• Made of molded polystyrene 0.10" thick with double-beveled inking edges and double beveled center cutout fingerlifts
• Fluorescent orange color reflects light along the drawing edge
• Available sizes: 4", 6", 8", 10", 12"

Alvin IB05-B Iceberry Mechanical Pencil, 0.5 mm

The Alvin Iceberry Mechanical Pencil is an economical choice for students, hobbyists, and even professionals. It is a versatile and reliable mechanical pencil that is equipped with a push-button lead advance. With its rubberized finger grip, it allows convenient and non-slip use. It comes with a plastic pocket clip for easy accessibility and portability.

• Create sharp and clean lines
• Economical yet durable
• Push button lead advance
• Plastic pocket clip
• Rubberized non-slip finger grip for minimal lead breakage, easy transport, and comfortable writing control
• 0.5 mm point size
• The built-in eraser under cap lets you correct and erase marks and mistakes with convenience
• Made of premium quality material that offers long-lasting performance

Alvin Smoke-Tint Triangle 30°/60° Features

• Made of molded 0.10" thick polystyrene
• Features a transparent non-glare smoke tint for easy visibility
• Edges are double beveled with handy fingerlifts for quick placement and removal
• Available sizes: 4", 6", 8", 10", 12", 14"

Alvin Smoke-Tint Triangle 45°/90° Features

• Made of molded 0.10" thick polystyrene
• Features a transparent non-glare smoke tint for easy visibility
• Edges are double beveled with handy fingerlifts for quick placement and removal
• Available sizes: 4", 6", 8", 10", 12"

Alvin Stainless Steel Erasing Shield Features

The Alvin Stainless Steel Erasing Shield is made of high quality .005" flexible stainless steel with 26 precision tooled apertures. For precise and controlled erasing. Polished finish resists tarnishing.

• Precise and controlled erasing
• High quality
• Flexible stainless steel
• 26 precision tooled apertures

Capacitive Stylus Features

• Ultra sensitive - Using the latest technology, this stylus is as responsive as your fingers
• Compatibility - Compatible with all capacitive touch screen devices, including iPad, iPhone and the Carlson Surveyor2 data collector
• Conveniently designed in pen form; includes lanyard cord, perfect for carrying around
• Protection - Durable, soft tip protects your screen from scratches

• Antenna 450-470 MHz high frequency
• Fits eGPS M6 and Champion PRO GNSS Receivers